Hama 00108392, Руководство по эксплуатации

Страница: 4 / 15

3
5. Getting Started
Warning – Batteries
• When inserting batteries, note the correct
polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could
result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries)
that match the specified type.
• Before you insert the batteries, clean the battery
contacts and the polar contacts.
• Do not allow children to change batteries
without supervision.
• Do not mix old and new batteries or batteries of
a different type or make.
• Remove the batteries from products that are not
being used for an extended period (unless these
are being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or
allow them to enter the environment. They can
contain toxic, environmentally harmful heavy
metals.
• Immediately remove and dispose of dead
batteries from the product.
• Avoid storing, charging or using the device
in extreme temperatures and extremely low
atmospheric pressure (for example, at high
altitudes).
• Open the battery compartment (4), insert two AAA
batteries with the correct polarity and close the
battery compartment (4).
• If the battery charge is low, the Bluetooth/battery
status LED (1) will begin to flash blue during
operation. Replace the batteries immediately as
described above.
6. Operation
Note
• The functions described in this section are
only available for Bluetooth-capable terminal
devices.
• Note that the maximum range for Bluetooth
is 10 metres without obstacles such as walls,
people, etc.
6.1 Bluetooth
®
pairing
Note – Pairing
• Make sure that your Bluetooth ® -capable
terminal device is on and Bluetooth
®
is
activated.
• Make sure that your Bluetooth ® -capable
terminal device is visible for other Bluetooth
®
devices.
• For more information, please refer to the
operating instructions of your terminal device.
• Slide the [OFF/ON] switch (2) to the ON position
to switch on the Bluetooth
®
keyboard.
• Press and hold the [CONNECT] button (3) until
the Bluetooth ® /battery status LED (1) begins to
continually flash blue. The keyboard is searching
for a Bluetooth
®
connection.
• Open the Bluetooth
®
settings on your terminal
device and wait until Hama KEY4ALL appears in
the list of Bluetooth
®
devices found.