3
5.1 Automatic station search (autoscan function)
The FM transmitter can automatically search for the FM
frequency currently being used least by local radio stations
(autoscan function). This frequency is ideal for uninterrupt-
ed transmission.
•
Briefly press the S station search button. Wait for the
search to finish.
•
Set the frequency shown on the display on your car radio
and start playback.
5.2 Automatic station search with saving
•
Press the S station search button for about 3 seconds.
Wait for the search to finish.
•
After the station search is completed, the display shows
one of three frequencies that are best suited for transmis-
sion. The three frequencies are automatically saved.
•
Press the M memory button to view the three stored
frequencies.
•
Use the frequency buttons (CH+/CH-) to select the stored
frequency of your choice and confirm your selection with
the M button.
•
Set the frequency shown on the display on your car radio
and start playback.
•
If you do not want to select a frequency, press the M
button to exit the stored frequency selection.
5.3 Manual station search
•
Search for an available frequency on your car radio (static
without partial signals).
•
Use the CH+/CH- frequency buttons to set the same
frequency on the FM transmitter.
Note – Changing locations and reception
problems
•
Generally, you will operate the FM transmitter in a
moving vehicle. This means that the reception condi-
tions change and previously available frequencies can
become unusable.
•
Use the automatic or manual station search to find a
suitable frequency if the music transmission stops or
is disrupted.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth
and do not use aggressive cleaning agents.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
9. Technical Data
FM transmitter with
USB port
Input voltage
12 – 16 V
Input amperage
500 mA
current consumption
transmitter
20 +/-3 mA
Ausgangsspannung USB
5.0 V
Output voltage
max. 1000 mA
Cable length
80 cm
Frequency band(s)
87.6 – 108 MHz
Maximum radio-frequency
power transmitted
max. 50 nW
10. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of
with household waste. Consumers are obliged by law to
return electrical and electronic devices as well as batteries
at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this
are defined by the national law of the respective country.
This symbol on the product, the instruction manual or the
package indicates that a product is subject to these
regulations. By recycling, reusing the materials or other
forms of utilising old devices/batteries, you are making an
important contribution to protecting our environment.
