Installation
Please make sure the Thingsee GATEWAY LAN is installed before you
install the sensors.
To identify the gateway, read the QR code on the backside of the device
with a QR code reader or Thingsee installation application on your
mobile device.
Identifying the device is not necessary, but it will help you keep track of
your IoT installation and help Haltian support to solve possible issues.
QR code
To identify the device over Thingsee API, please check:
https://support.haltian.com/api/open-services-api/api-sequences/
Connect the power source to the gateway and plug it into a wall socket
with 24/7 power.
Note:
Always use the power source included in the sales package.
Data integration
Make sure that data integration has been properly setup prior to the
installation process. See link
https://support.haltian.com/howto/aws/
Thingsee data can be pulled (subscribed) from the Thingsee Cloud live
data stream, or the data can be pushed to your defined end point (e.g.
Azure IoT Hub before you install the sensors.)
