Halo CK10, Руководство по эксплуатации

Страница: 19 / 19

Softener Panel
5 Button
To Change Factory Settings:
Simultaneously Press NEXT & UP then release:
1. Configuration ........................................... Softener
Press Next:
2. Grain Capacity ..................................... 30K
Press Next:
3. Pounds of Salt per Regen ........ Example 9lbs
Press Next:
4. Backwash Duration ........................ Normal
Press Next:
5. Gallons Capacity ................................. Auto
Press Next:
6. Brine Refill ........................................... Post
Press Next:
7. Regenerant Flow ..................................... dn
Press Next:
8. Regeration Initiation ....................... Normal
Installer Set-up:
Simultaneously Press NEXT & UP then release:
1. Hardness (Grains) .................................Example 30
Press Next:
2. Calendar Override .................................... 14
Press Next:
3. Time of Regen (hour) ........................ 2:00AM
Press Next:
4. Time of Regen (minute) .................... 2 :00AM
Diagnostic:
Simultaneously Press UP & DOWN then release:
1. Number of Days Since Last Regen
Press Next:
2. Number of Gallons Since Last Regen
Press Next:
3. Reserve Capacity Gallons Used Last 7 Days
Press Next:
4. Daily Gallon Usage For Last 64 Days
Press Next:
5. Current Flow Rate
Press Next:
6. Max Flow Rate in The Last 7 Days
Press Next:
7. Total Gallons Since Last Reset
Press Next:
8. Number of Days Since Last Reset
Press Next:
9. Number of Regenerations Since Last Reset
Valve History:
Simultaneously Press UP & DOWN TWICE:
1. Software Version
Press Next:
2. Max Flow Rate Since Start-up
Press Next:
3. Total Number of Gallons Since Start-up
Press Next:
4. Total Number of Days Since Start-up
Press Next:
5. Total Number of Regenerations Since Start-up
Press Next:
6. Number of Error Occurances Since Start-up