Halma Ocean Optics QE65 Pro, Инструкция по установке и эксплуатации

Страница: 28 / 34

B: Specifications
20 220-12200-000-02-201603
Specification Value
Supply Voltage 4.5
– 5.5 V
Power-up Time < 5 seconds
Signal-to-noise ratio 1000:1 (single acquisition)
Gratings 21 gratings available
Entrance aperture 5, 10, 25, 50, 100 or 200 µm wide slits
OFLV filters
OFLV-QE (200-950 nm); OFLV-QE-250 (250-1000 nm); OFLV-QE-300
(300-1050 nm); OFLV-QE-350
Focal length f/4, 101.6 mm (input and output)
Optical resolution (FWHM) Depends on grating and size of entrance aperture
Dark noise 3 RMS counts
Dynamic range 7.5 x 10
9
(over integration range); 25000:1 for a single integration period
Fiber optic connector SMA 905 to single-strand optical fiber (0.22 NA)
Integration time 8 ms to 15 minutes
Corrected linearity >99.8%
Thermal stability 2±1 pixel shift from -10 to 50°C
Interfaces USB 2.0, 480 Mbps (USB 1.1 compatible); RS-232 (3-wire)
System Compatibility
You can use the QE65 Pro’s USB connectivity with any computer that meets the requirements for the
spectrometer operating software being used (Windows XP/Vista/Windows 7, Mac OS X and Linux). See
About OceanView Software .
Alternately, the QE65 Pro has a serial port for connecting to PCs, PLCs, and other devices with a
Windows 32-bit operating system that support the RS-232 communication protocol. However, this
connection method requires an external power supply to power the QE65 Pro, the HR4000 Breakout Box,
and a serial cable.
30-Pin Accessory Connector Pinout
The QE65 Pro features a 30-pin Accessory Connector, located on the side of the unit as shown: