Halma Ocean Optics QE65 Pro, Инструкция по установке и эксплуатации

Страница: 10 / 34

1: Introduction
2 220-12200-000-02-201603
The QE65 Pro’s onboard module has 10 user-programmable digital I/O lines for interfacing to other
equipment; and a pulse generator for triggering other devices. You can use the I/Os to flash a lamp,
stop/start a process, and send a message/alarm during the spectrometer’s integration period. The
spectrometer’s operating parameters can be controlled through software. In fact, wavelength calibration
coefficients unique to each spectrometer are programmed into a memory chip right on the spectrometer.
TheQE65 Pro’s high-speed electronics have been designed for considerable flexibility in connecting to
various modules and external interfaces, including PCs, PLCs and other embedded controllers, through
USB 2.0 or RS-232 communications. Its USB 2.0 interface enables full spectral scans into memory every
7 milliseconds.
The QE65 Pro operates via USB interface. A +5 VDC external power supply is required for the TE
Cooler (TEC) and to operate the spectrometer via an RS-232 interface. This power supply is included
with your spectrometer.
Features

Hamamatsu S7031-1006S Detector

Peak QE: 90% at peak; 65% at @ 250 nm

Back-thinned for good UV sensitivity

MPP operation for low noise

TE Cooled

Spectrometer Design
 Symmetrical Crossed Czerny Turner

101mm focal length
 14 gratings across UV-NIR; HC-1 composite grating for broad wavelength coverage

6 slit widths ranging from 50 to 200
µ
m

Electrical Performance

16 bit, 500KHz A/D converter

Integration times from 8ms to ~15min

Embedded microcontroller allows programmatic control of all operating parameters and
standalone operation

USB 2.0 480Mbps (high-speed) & 12Mbps (full speed)

RS232 115Kbaud
 Multiple communication standards for digital accessories (SPI, I2C)

Onboard Pulse Generator

2 programmable strobe signals for triggering other devices

Software control of nearly all pulse parameters

Onboard GPIO

10 user-programmable digital I/Os