220-12200-000-02-201603
11
Chapter 3
Troubleshooting
Overview
The following sections contain information on troubleshooting issues you may encounter when using the
QE65 Pro Spectrometer.
QE65 Pro Connected to Computer Prior to
Software Installation
Windows Operating Systems
If you connected your Ocean Optics QE65 Pro device to the computer prior to installing your
spectrometer operating software application (OceanView) on a Windows platform, you may encounter
installation issues that you must correct before your Ocean Optics device will operate properly.
Follow the applicable steps below to remove the incorrectly installed device, device driver, and
installation files.
Note
If these procedures do not correct your device driver problem, you must obtain the
Correcting Device Driver Issues
document from the Ocean Optics website:
http://oceanoptics.com///wp-content/uploads/Correcting-Device-Driver-Issues.pdf
.
Remove the Unknown Device from Windows Device Manager
►
Procedure
1.
Open Windows Device Manager. Consult the Windows operating instructions for your computer
for directions, if needed.
2.
Locate the
Other Devices
option and expand the
Other Devices
selection by clicking on the "
+
"
sign to the immediate left.
Note
Improperly installed USB devices can also appear under the Universal Serial Bus
Controller option. Be sure to check this location if you cannot locate the unknown device.
Содержание Ocean Optics QE65 Pro
Страница 8: ...About This Manual vi 220 12200 000 02 201603 ...
Страница 14: ...1 Introduction 6 220 12200 000 02 201603 ...
Страница 18: ...2 Installing the QE65 Pro 10 220 12200 000 02 201603 ...