8
2
1
3
4
Make sure the curtain is
parallel
to the door by
adjusting one or both screws on the side.
Position the curtain
closer to or further away
from the door by turning the screw at the top.
Carefully lock the sensor position by firmly
fastening the angle lock screw. Make sure the
red spots have not moved.
First of all, remove the blue protection film from the laser window.
Rotate the sensor in order to align the centre of
the red spots with the centre of the door.
To activate red spots :
- Press 2x
OK
(product keypad)
- Press 2x
(IR remote control)
- Mobile app.
PA
R
AL
LE
L A
NG
LE
TI
LT
A
NG
LE
LOC
K
T
H
E S
ENS
O
R
AWAY
AWAY
CLOSER
CLOSER
A. IF THE SENSOR IS MOUNTED IN THE CENTER OF THE DOOR
Follow the steps below depending on how the sensor is mounted on the door :
A. if the sensor is mounted in the center of the door
B. if the sensor is mounted on the left or right side of the door *
*
Note that right side mounting could alter the performance of the motion detection.
POSITIONING OF DETECTION FIELD
1b
