Halls Greenhouses Qube Square, Руководство пользователя

Страница: 4 / 60

4
Important infomation!
GB
Congratulations On Your Choice Of Greenhouse
Juliana Drivhuse A/S is a privately owned Danish
company established in 1963. At Juliana Drivhuse
we design, develop and manufacture our
greenhouses based on principles of simplicity,
aesthetics, functionality and quality. Over the years,
Juliana Drivhuse has acquired several competing
companies, so that today we offer three brands:
Halls, Juliana and Gabriel Ash. Each brand contains
products with unique designs and functionalities,
but where the common feature is a correlation
between quality and price.
All products are designed and manufactured to
last for many years and form the framework for
people and the good life, whether it is primarily
for cultivation or as an oasis in the garden. On
www.juliana.com you can read more about the
company, the individual brands, and the wide range
of accessories available for our greenhouses.
This Installation Manual
When assembling your new greenhouse, you need
to follow these instructions step by step. You will
find all bolts, nuts and fittings in a separate box.
NOTICE: This manual might be designed for several
sizes of the same greenhouse model and follows
relevant principles in EN1090-3, section 9 Assembly.
Safety Precautions
• Only carry out assembly in dry and calm weather.
• Make sure you have an assistant to help you.
• Always wear work gloves while glazing. Green-
house glass has sharp edges, especially if it breaks.
• Assistants, and especially children, must be warned
that broken glass presents a safety hazard. Pick up
all broken glass at once and remove it with care.
• Any ladders used must be placed on a level surface.
• If you leave the greenhouse during assembly,
please secure against weather conditions.
Location
The right location of the greenhouse is important
to create the best growth conditions for plants
and ensure the longevity of the greenhouse. The
greenhouse must be placed in a sunny position
and shielded from strong winds. As far as possible,
avoid positioning the greenhouse under trees as the
shade will encourage algae growth. Likewise, fallen
branches and leaves can damage the greenhouse
and clog up the gutters. We recommend that you
locate the greenhouse on your favourite spot
in your garden, especially if you want to use the
greenhouse for purposes other than growing plants.
IMPORTANT: Before installing the greenhouse you
must create a flat and true surface at least as big as
the external dimensions of the greenhouse - this
will ease the setup of the greenhouse.
Base
There is not a base included with this product.
However, one of our pre-fabricated bases can
be purchased separately. If you purchase our
pre-fabricated base anchor holes must be deep
enough to extend below the frost line. Follow
measurements shown on the following pages. All
measurements are external measurements. If our
pre-fabricated base is used this is attached to the
greenhouse at every vertical glazing bar as shown
on pictures.
The best assembly order:
1. Ensure level ground.
2. Add a bend on the end of the ground anchors
as shown on the drawing and mount afterwards.
3. Mark holes according to drawing – make sure
diagonal measurements are identical.
4. Dig holes to extend below the frost line. Follow
local recommendations.
5. Assemble base – ground anchors/square tubes
must stand freely in the holes.
6.
Make sure that the base is 100% level and at a
straight angle. Make sure diagonal measurements
are identical.
7. Fill up the holes with concrete.
Example: a hole with dimensions Ø150 mm and
900mm in depth needs approximately 16 liters of
concrete.
8. Make sure that the base is still 100% level and at a
straight angle. Make sure diagonal measurements
are still identical.
Upon recommended time of curing you may start
assembling your greenhouse.
Locating The Greenhouse On A Solid Base
If the greenhouse is not going to be concreted
down, it must be secured using suitable brackets.
Brackets/bolts are not part of this purchase. If a
pre-fabricated base is used ground anchors should
be cut off with a hacksaw at the same height as the
base. Pre-fabricated base is designed for casting
and therefore additional drilling and purchase of
materials for this purpose is to be expected. Be
aware that most insurance companies do not cover
greenhouses that do not have a cast base.
Order of Assembly
Follow the assembly order as shown on the
following pages.
Place components as shown on the drawing and
then assemble the section in the order shown in
the pictures. Do not tighten the nuts completely
until the entire section is assembled.
When all sections are complete the body of the
greenhouse can be assembled.
NOTICE: In several places the assembly instruction
shows that extra bolts must be inserted in the
profiles. These are to be used for attaching other
parts later in the process.
IMPORTANT: Before glazing make sure that the
gables and sides are level and straight, and bolts/
nuts are tightened firmly and in close contact with
profiles. A greenhouse should never be left partially
glazed.
Glazing
1. Add butyl tape (20-1230).
2. Remove protective paper on butyltape.
3. Fit the glass/polycarbonate sheets centered be-
tween glazing bars.
4.
Finish with cappings.
Recommended order of glazing: sides – gables – roof.
Complete one section at a time. If you accidentally
break a pane, carefully pull the broken glass
outwards. Clean the profile completely before
fitting a new pane of glass.
Polycarbonate Sheets
The illustrations show how to fit the sheets and strips.
If adjustment is necessary use a finetooth saw.
NOTICE: To avoid the growth of algae, do not allow
the polycarbonate sheets to come into contact
with the ground.
Tools
The tools recommended to assemble the green-
house are shown on the following pages.
Tips and Tricks
See www.juliana.com for more tips on assembly of
your greenhouse.
Maintenance
• Clean the sliders as needed.
• Grease the hinges of the doors, lock and sliders
approximately every 6 months.
• Tighten bolts/nuts.
• Clean the gutters from leaves etc.
• Adjust windows if necessary.
• Replace broken glass.
• Clean the greenhouse before and after the
growing season.
Winter and Storm Protection
If you anticipate snow and/or a storm we re-
commend the following:
• Support the roof section.
• Remove larger amounts of snow from the roof.
• Take precautions to prevent snow falling from e.g.
a tree or roof.
• Remove the cylinders from the automatic window
openers (accessory).
• Secure door(s) and window(s) to prevent wind
damage to the greenhouse.
Please note that not all insurance companies
automatically cover greenhouses.
12-year Guarantee
A full description of the guarantee can be found on
www.juliana.com. Provided that the greenhouse
is assembled and maintained according to the
requirements, the greenhouse is covered by a 12-
year guarantee. In case of missing parts/defects
this must be reported immediately.
General maintenance of the greenhouse such
as cleaning, lubrication, post-tensioning of nuts/
screws must be complied with, as this may affect
the structural quality of the greenhouse and its
resistance to wind and snow load.
Please note that the guarantee does not cover;
• Damage and functional problems due to lack of
lubrication and maintenance.
• Any paintwork is covered by a 2-year guarantee.
• Nuance differences in colour may occur and
there may be small marks on the profiles due to
the painting process. This is not covered by the
guarantee.
• Glass, polycarbonate, freight, assembly, possible
removal, possible consequential damage, labour
costs, etc.
• Parts damaged by external influences, such as:
other building parts, climate impacts, vandalism,
force majeure or other external conditions. E.g.
remember to remove snow from the roof to avoid
possible breakage due to excessive weight.
• Wear parts (such as handles, wheels, sliders,
cylinders and locking devices). Wear parts must
be replaced on a regular basis depending on use
and operation.
• Product defects arising from incorrect/in-
appropriate use of parts.
NOTICE: a greenhouse is a single-skin, dry-build
construction that is not 100% dense. Depending
on weather conditions, leaks may occur at roofs,
windows, doors and corners.
Complaints
All our greenhouses are built according to the
highest quality standards. However, should you
experience any problems, please contact your
dealer at once. When describing the defect, please
state the greenhouse model and component
number.
Congratulations on your new greenhouse, which
we hope will bring you great joy for many years to
come.