Hall Technologies November 4, 2022
Page 14 of 26
USB CONTROL
Prior to operation make sure the PC and all other peripheral USB devices are connected.
Connect a PC to the USB HOST ports with USB cables.
Connect peripheral USB devices to the USB DEVICE ports of the TX and the RX.
The white outline on the back panel of the transmitter and receiver represents one group.
When the input source in the same group is selected, the peripheral USB devices (on both the
TX and the RX) can be connected to the host PC. Please refer to the following diagrams.
Note:
The USB-C input already has a built-in recognizable function, which means that when you
select the USB-C input, the PC can be connected to another peripheral USB device directly.
1.
VGA / DP source input on the TX is selected:
In this connection method, the VGA IN, AUDIO IN and TX USB HOST 1 are in a group. When the
VGA input is selected, the peripheral USB devices (on both the TX and the RX) can be connected
to the PC which is connected to the USB HOST 1.
