Hall Technologies November 4, 2022
Page 13 of 26
Key Functions
AUTO SWITCH
Auto Switch can be enabled or disabled using either the Web UI or by sending the API command
to the device. (For more information, please refer to “Web UI Control” section and the separate
document “API Command Set for HT-GEMINI”)
WHEN THE AUTO SWITCH IS ON (DEFAULT):
When the HT-GEMINI powers up, if the source selected before HT-GEMINI being powered
off is still active, the HT-GEMINI will automatically switch to this source. If the previously
selected source is not active and there is more than one input source connected, the HT-
GEMINI will output signal following the auto switch priority order: VGA > DP > TX HDMI IN >
USB-C > RX HDMI1> RX HDMI2.
When a new input source is connected, the HT-GEMINI will automatically switch over to this
source.
When the currently selected source is disconnected, the HT-GEMINI will switch to the next
active input source with highest priority, and if there is no other active input source the HT-
GEMINI will keep the currently selected source.
WHEN THE AUTO SWITCH IS OFF:
•
When a new source is connected, the HT-GEMINI will not automatically switch to that source.
Users will need to switch to the desired source manually by pressing the appropriate input
button on either the TX or the RX.
