Hall Research Technologies U97-ULTRA, Руководство пользователя

Страница: 13 / 24

Console Extender
13
Sender RJ45 outputs to Receiver
Port A of the UTP carries VGA A and AUDIO signals
Port B of the UTP carries VGA B and Bi-directional RS232 signals
Port C of the UTP carries the Standard (STD) USB and the “Direct” USB port DR1.
Port D of the UTP carries the “Direct” USB port DR2
2.4 Connecting the Receiver outputs
The receiver outputs are shown below.
Receiver Rear Panel
Connect display devices such as two LCD’s to the VIDEO ‘A’ & VIDEO ‘B’ connectors of
the receiver.
Connect a LINE AUDIO OUT from the receiver to any standard PC external speakers
(powered) using male to male 3.5mm audio patch cable.
If an amplified audio output level is desired, connect the receiver’s PWR AUDIO OUT
connector to the desired device. The pin diagram of the receiver’s PWR AUDIO OUT is
shown below. For reference also see CA10084 diagram above.