Hall Research Technologies U97-ULTRA, Руководство пользователя

Страница: 10 / 24

Model U97-ULTRA
10
2. Installation
2.1 Connecting the Sender to the PC
Using the supplied cables; connect the sender to the PC.
Sender Rear Panel
Close-up of Sender Input Connections
Close-up of Sender UTP Connections to the Remote Unit
Connect PC’s VGA outputs to VGA A IN and VGA B IN connectors using the supplied
cables.
Connect the audio source to AUDIO connector using the furnished DB15 male-to-female
cable. Below is a diagram of the sender’s audio input connector and pass-through audio
output. When connecting to a 3.5mm source use adapter part number CA10084 (sold
separately see drawing below).
As seen in the attached schematic diagram, the unit only utilizes and passes through the
amplified audio pins of the DB15 input connector. The audio input pins and
corresponding return pins are kept isolated in the sender (high impedance).