4-port Seamless-Switch with Multi-view
8
© Copyright 2017 Hall Research, Inc.
Block Diagram
4.1 RS-232
The Serial port on the SSW is always active. When the changes are made from the
front panel or using IR controller the corresponding Serial commands are sent over
RS-232 as a response. This allows easy integration of SSW-HD-4 with 3rd party
controllers.
Description
Setting
Baud Rate
19200
Data bits
8
Parity
None
Stop bits
1
Flow control
None
4.2 Serial Commands
Note that all the commands should be in upper case and should end with Carriage
Return <CR>.
Command
Description
Response
S SOURCE
n
n
=
0
to
4
Note:
S SOURCE 0
E.g.
S SOURCE 1
Selects the Primary HDMI Input.
Blanks the Output .
Selects the HDMI Input #1. (
Default
)
-No Response-
R SOURCE
Read the status of primary HDMI
SOURCE n
