Video Generator/Analyzer
17
Loop Test - Connection Examples
Procedure for Loop Test:
Select Loop Test from the HOME screen.
Set the “Time Duration” for the test.
Touch the “START” button to evaluate the signal transmission quality. Do not touch any buttons for at
least 3 seconds after starting test.
Let the PGA-VHD complete the test, or terminate Test by pressing “STOP”.
8.0 Settings
The Settings selection (gear icon) consists of system adjustments, firmware and network setup.
8.1 Preferences
Screen Brightness:
Adjust the screen brightness in required levels in percentage.
Beep:
Enable/ Disable system sound.
Factory Reset:
Select this option to restore the device to factory default setting.
8.2 Network Setting
The PGA-VHD has Ethernet (TCP/IP) control accessibility via Network settings under the “Settings” icon on the
HOME screen.
Connect the Ethernet port of the PGA-VHD with the PC or an external control system. The user has the option to
select either the DHCP or Static IP addressing.
Network Settings
As shipped from the factory (or after restoring factory defaults), the PGA-VHD IP address is set for DHCP and
the IP address will be assigned by the router.
