PGA-VHD
10
transport is using any encoding or compression techniques, the loop test will result in huge errors since pixels are
modified (and delayed) by the encoder. You can use loop test for cables or extenders that do not modify pixel
values in anyway, such as most HDBaseT products or Hall Research’s 4K Javelin optical HDMI cables.
Loop Test
Loop Test
Menu
Sub-Menu
Description
1920x1080@60
4Kx2K@30
4Kx2K@60
Time Duration
/ Time Elapsed
Evaluate the signal quality of HDMI cables and Device Under Test
(DUT) in 3 different resolutions FHD(1080p), UHD @ 30 and UHD
@ 60
It is recommended to run the test for at least 15 seconds for the results to be meaningful. You can use Loop Test to
compare the quality of different cables or their ability to handle UHD 30Hz or 60 Hz
3.2.6 Settings
This section shows the system settings to change the screen brightness, network settings, firmware update and
battery status.
System Settings
Settings
Menu
Sub-Menu
Description
Preferences
Screen
Brightness
Adjust the screen brightness at required levels
Beep
Enable/ Disable system sound
