Hali-Brite L-806 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 51

Hali-Brite L-806 Скачать руководство пользователя страница 14

Getting Started

CHAPTER 4

Getting Started

Shipping and Unpacking

All components needed  for assembly  and  installation  of  the  L-807, L-807(L),
L-806  and  L-806(L)  are  shipped  on  a  standard  10  ft  pallet.  If  additional
components or more than one unit is ordered the shipping pallet may be larger.
All  components  are  fas-  tened  to  the  shipping  pallet,  tools  will  be  needed  to
unfasten these components prior to installation.

After unfastening all the components from the pallet inspect them for damage.
If you find components that have been damage from shipping please report
them to the shipping company and file a claim.

NOTE: You may want to photograph the damaged components in place on
the shipping pallet. This will help you in placing a claim with the shipping
company.

CAUTION: Some components are very heavy. Always use correct
lifting practices when removing these components from the
shipping pallet. If components are too heavy find additional help
in removing these components.

If excessive damage has occurred, not allowing assembly of the wind cone,
contact Hali-Brite

®

for replacement parts.

14

L-807 and L-806 Wind Cone Installation and Maintenance Manual

«
...
12
13
14
15
16
...
»

Содержание L-806




















































Отзывы:

Нет отзывов