ecycling
his product bears the selective sorting symbol for waste electrical and
ment (WEEE). This means that this product must be
s are
sence of hazardous
R
T
electronic equip
handled pursuant to European Directive 2002/96/EC in order to be
recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting proces
potentially dangerous for the environment and human health due to the pre
substances.
Customer Careline: 0845 601 7834
9
Troubleshooting chart
Symptom Possible
cause(s)
Corrective Action(s)
Pressure washer
does not start
1 .Unit is pressurized
2. Plug did not well connected or
electric socket is faulty
3. Extension cord too long or wire
size too small
4. Main voltage supply too low
1. Squeeze trigger on gun
2. Check plug, socket
3.Remove extension cord
4. Check that main supply
voltage is adequate
Pump does not
reach necessary
pressure
1. Water inlet filter is clogged
2.Pump sucking air from hose
connections
3. Nozzle worn or not correct size
1.Clean water inlet filter
2.Check that connections
and locking ring are
properly tightened
3. Contact customer
Careline, do not return
pressure washer to store
of purchase
Low pressure
1.Check orange pressure
collar adjustment,roate
pressure adjusting orange
collar anti clockwise to
increase pressure(page 6)
Fluctuating Pressure
1. Pump sucking in air
2. Clogged nozzle
1. Check that hoses and
connections are tight
2. Clean with tip cleaner
(see page 6)
Motor stops
suddenly
1. Extension cord too long or wire
size too small
2. Thermal safety
switch
has
tripped due to overheating
1.
R
emove extension cord
page4)
2. Check that main supply
voltage age corresponds
to specifications
3.Turn
of f
and
unplug
from the mains power
supply and allow to cool
for at least 10 minutes,if
the motor continues to
cut
out
due
to
overheating
contact the
Customer
Careline
Number
084 601 7834
.
No detergent
Suction – units with
attachable
applicators
1.Detergent applicator clogged
1. Clean applicator with
warm water
2. Replace applicator
Unit begins to
smoke
1.Overheated, overloaded or
damaged motor
1.Turn
of f
uni t
and
contact customer careline
(
Содержание HP 2800
Страница 6: ......
