1
2
3
120
L
s
d
s
120
Part B: Product specifi c information
B1 Spherical head lifting anchor type 6000
The HALFEN DEHA Spherical head
transport anchors and the specifi ed
additional reinforcement have to be
installed according to the engineers
drawing. The specifi ed load class
and length are to be observed. The
spherical head lifting anchors are
installed in the mould by using
HALFEN DEHA Recess formers
(see fi g. part A).
After the concrete of the precast
element is hardened, the recess
former is removed (see fi g. part A).
If corrosion protection is required
for the anchor, the recess has to be
fi lled with mortar after the installa-
tion of the element. Alternatively,
the available products in galvanised
steel or stainless steel can be used.
The assembly plan, which specifi es
the required concrete strength, the
direction of tension loads relative to
the anchor and the design of the
spreader beam, must be followed.
B2 Spherical head plate anchor type 6010
The HALFEN DEHA Spherical head
plate anchors have to be installed
according to the engineers plans.
The specifi ed load group and length
are to be observed. The anchors are
installed in the mould by using
HALFEN DEHA Recess formers, as
shown in part A (see also instruc-
tions KKT-A for the recess formers).
Additional reinforcement must be
installed,
the appropriate reinforcement bars
(dimensions see table) must be
arranged crosswise over the foot
plate of the anchor, as shown in
the drawings. Make sure, that the
reinforcement bars bear directly
on the plate.
After the concrete of the precast
element is hardened, the recess
former is removed (see description
part A). If corrosion protection is
required for the anchor, the recess
is to be fi lled with mortar after the
installation of the element.
Identifi cation of the anchor:
Load class
CE marking
Manufacurer sign HALFEN DEHA
Anchor length [mm]
Identifi cation of the anchor:
Load class
CE marking
Manufacurer sign HALFEN DEHA
Anchor length [mm]
Required additional reinforcement
Designation
Additional
reinforcement
d
s
[mm]
L
s
[mm]
6010 - 2.5 - 0055
4 × Ø 8
200
6010 - 2.5 - 0120
4 × Ø 10
300
6010 - 5.0 - 0065
4 × Ø 12
450
6010 - 5.0 - 0110
4 × Ø 12
450
6010 - 10.0 - 0115 4 × Ø 16
600
6010 - 10.0 - 0150 4 × Ø 16
600
Alternatively, the available products
in galvanised steel or stainless steel
can be used. The assembly plan,
which specifi es the required concrete
strength, the direction of tension
loads relative to the anchor, the
design of the spreader beam, must
be followed. The slab must be
designed as load case “handling”.
4
© 2020 HALFEN · INST_KKT-E 07/15 · www.halfen.com
HALFEN KKT-E
Assembly Instructions
Deutsch
English
Polski
