8
Safety Information
1.2
General information
• In addition to the information
provided in this operating manual, all
the legally applicable health and
safety provisions must be observed.
• Before starting up the machine for
the first time, read the operating
manual supplied with it thoroughly as
well as any separate manuals
provided with additional or
attachment devices and observe all
the information during work.
• The equipment may only be
operated, serviced and repaired by
personnel trained by Hako technical
experts.
• This vehicle is not intended to be
used by persons (including children)
with limited physical or mental capa-
bilities or persons without sufficient
experience and ability.
• Particular attention should be paid to
the information regarding safety.
Technical expertise is the key to
preventing errors when operating the
machine and ensuring trouble-free
operation.
• The operating manual must always
be kept at the operating location of
the machine and, as a result, should
kept in a safe place on the
equipment.
• If the equipment is sold or rented out,
these documents should be
transferred to the new owner/
operator. The transfer should be
confirmed!
• The warning labels attached to the
machine provide important
information concerning safe
operation.
Illegible or missing labels must be
replaced by new ones.
• For reasons of safety, always use
original spare parts.
1.3
Operating information
• The machine is not suitable for
clearing up fluids, dust or
substances which represent a health
hazard, are inflammable or
explosive. No burning items may be
cleared up, e.g. glowing cigarettes.
In addition, it is forbidden to clean up
wood dust, e.g. beech and oak dust
- health hazard!
• When the machine is in
vacuumsweeping mode, it must not
be driven through puddles of water.
• Before starting the machine up for
the first time, the battery to be used
must be fully charged, properly, by
implementing the initial battery
charge routine (only Sweepmaster
B800). Hako assumes no liability for
damage to the battery caused by a
fault when the battery is charged for
the first time.
• The machine together with the
working equipment must be checked
in terms of proper condition and
operational safety each time prior to
use. Clear any faults immediately!
The machine must not be used when
not in a sound condition.
• Only start the machine when the