HAKO Scrubmaster B 120 R, Руководство по эксплуатации

Страница: 37 / 88

03-7177-00.fm
37
Putting into service
3.3 Checklist – before machine start-up
3.3.1 Installing the mains cable
1. Loosen the bolts of the cover Fig. 11-A using the supplied socket wrench
and remove the cover.
2. Route the cable of the mains plug Fig. 11-B through the opening in the
bracket Fig. 11-C . Ensure that the side of the strain relief without a latch
faces the front towards the opening.
3. Press the strain relief into the bracket until all latches have engaged.
4. Plug the mains plug
Fig. 11-D straight and firmly into the holder.
5. Reinstall the cover using the available screws.
No. Description
1 Checking the parking area for signs of leaks. Cables and tanks must not
show any sign of leaks or damage
2 Installing the mains cable, see section 3.3.1
3 Mounting the brushes and squeegee, see chapter Maintenance
4 Adjusting the driver's seat, if necessary, see section 3.3.2
5 Checking the battery charge and recharge it as required, see section 5.3
6 Emptying the waste water tank and clean it as required, see section 5.5
7 Filling the solution tank (see chapter Maintenance) and add detergent
according to the manufacturer's specifications
Fig. 11:
C
B
D
A