HAKO Scrubmaster B 120 R, Руководство по эксплуатации

Страница: 71 / 88

05-7177-00.fm
71
Maintenance and Servicing
Emptying the solution tank via the maintenance opening
Position the machine ensuring that the maintenance opening Fig. 28-29 is
above a drain in the ground.
1. Turn and remove the cover of the maintenance opening.
2. The solution tank is emptied via the maintenance opening.
3. After emptying the tank, place the cover on the maintenance opening and
screw tight.
Emptying the solution tank via the vacuum system
This method is recommended if no drain is available and the waste water tank
is empty.
1. Turn off the machine.
2. Close the ball cock
Fig. 28-B .
3. Turn and remove the filter cover of the fresh water filter Fig. 28-24 .
4. Remove the suction hose Fig. 29-28 from the squeegee A and plug it onto
the filter housing Fig. 29-A .
5. Open the ball cock fully.
6. Switch on the suction turbine via button
Fig. 29-37 . The fresh water is
conveyed into the waste water tank.
Note
To facilitate loosening and closing the cover, use the supplied
handle
Fig. 28-A .
Fig. 29:
37 28
A