HAKO Hakomatic B45 страница 9 Скачать руководство пользователя

Страница: 9 / 60

Safety information

1.4

Maintenance information

• Operating personnel must complete

the necessary daily and weekly

maintenance work. All other mainte-

nance work must be completed at

your nearest Hako service center.

• The maintenance work and mainte-

nance intervals prescribed in the

operating manual must be adhered

to.

• Suitable tools must be used for clea-

ning and maintenance work.

• The machine must be inspected by a

recognized technical expert in re-

spect of operational safety, within

the terms of the applicable accident

prevention laws, at reasonable inter-

vals (we recommend at least once a

year) and following modification or

repairs.

• Spare parts must comply with the mi-

nimum technical requirements stipu-

lated by the manufacturer! This is

ensured by the use of original spare

parts.

• Before cleaning and servicing the

machine or replacing parts, switch

off the motors and main switch (Ha-

komatic B45 CL only).

• To prevent unauthorized use of the

machine, remove the key from the

main switch (Hakomatic B45 CL on-

ly).

• Always disconnect the battery termi-

nal before starting any work on the

electrical installation.

• When working in the area of the rai-

sed recovery tank, it must be hinged

open fully to prevent it being knok-

ked shut or further open and down

unintentionally.

• It is not permitted to clean the machi-

ne with a pressure washer or steam

blaster.

• It is not permitted to use aggressive

and corrosive cleaning agents.

• Allow the machine to dry after being

cleaned, e.g. over the weekend.

• Only start the machine up when all

the safety equipment has been in-

stalled and brought to its protecting

position.

1.5

Particular risks

Electronics

• In the case of defects in the electrical

installation, switch the vehicle off im-

mediately and clear the fault.

• Work on the electrical equipment

may only be carried out by electrici-

ans who have received the necessa-

ry training and in accordance with

the electrical engineering regulati-

ons.

• The vehicle's electrical equipment

must be inspected/checked at regu-

lar intervals. Defects, such as loose

connections and cable damage,

must be rectified immediately.

• Only use original fuses with the

prescribed amperage.

Содержание Hakomatic B45





























































Результаты поиска

Содержание Hakomatic B45

Отзывы:

Похожие инструкции для Hakomatic B45

Бренды по названию

Популярные бренды

HAKO Hakomatic B45, Инструкция по эксплуатации

Результаты поиска

Содержание Hakomatic B45

Отзывы:

Похожие инструкции для Hakomatic B45

Бренды по названию

Популярные бренды