58
Maintenance and Care
Check the water deflectors on the side of the scrubbing unit and replace them as necessary (left
and right)
o
Grease the scrubbing unit joints and connecting rods
o
Check the side scrubbing unit: brushes, water retaining ring, drive belt lugs
o
Check the dust vacuum shaking unit (including interval switching) and repair as necessary
o
Check the cassette filters for the dust vacuum and change as necessary
o
Measure the suction power of the dust vacuum
o
Check the functionality and correct adjustment (left and right) of the side brush; change as
necessary
o
Check the recovery tank, particularly the lid sealing quality and filter sieve
o
Change the O-rings in the draining hose and dosing valves
o
Check the suction hose is fitted properly and for signs of damage; clear any defects as necessary
o
Test the squeegee functions: pivot, raise/lower, deflecting rollers
o
Check front and rear sealing lips of the squeegee; change as necessary
o
Check the knurled nuts on the squeegee; change as necessary
o
Grease the joints and connection rods of the waste water vacuuming system
o
Adjust the support wheels on the squeegee
o
Check the vacuum at the suction hose; clear any defects
o
Activity
Interval
Every 250 operating hours
