Hakko Electronics Monitouch V9 Series, Руководство по подключению

Страница: 361 / 430

17.1 Temperature Controller / Servo / Inverter 17-3
Indirect Device Memory Designation
 Specify the ZONE number, command number, and the data number for the address number.
Example:
When specifying TD1000A
Store “1000A” as the address number.
Lower address No. = 000A (HEX)
Higher address No. = 0001 (HEX)
Example: When specifying ZC100A0
Store “100A0” as the address number.
Lower address No. = 00A0 (HEX)
Higher address No. = 0001 (HEX)

Specify the storage device memory address with the expansion code.
00H: Volatile
01H: Nonvolatile
PLC_CTL
Macro command “PLC_CTL F0 F1 F2”
15 8 7 0
n + 0 Model Device type
n + 1 Lower address No.
n + 2 Higher address No.
n + 3
Expansion code
*
Bit designation
n + 4 00 Station number
Contents F0
F1 (=$u n)
F2
External Standby Group
1 - 8
(PLC1 - 8)
n Station number
7
n + 1 ZONE No.: Fixed to 0
n + 2
ZONE COMMAND
008CH (Storage device memory: Volatile)
808CH (Storage device memory: Nonvolatile)
n + 3
n + 4
n + 5
n + 6
Data Concentrator
Resettable Alarm Relays
1 - 8
(PLC1 - 8)
n Station number
4
n + 1 ZONE No.: Fixed to 0
n + 2 ZONE COMMAND: 91H
n + 3
Bit
15 14 - 2 1 0
Zone1
Zone16
Bit
15 14 - 2 1 0
Zone17 Zone32
Bit
15 14 - 2 1 0
Zone33 Zone48
Bit
15 14 - 2 1 0
Zone49
Zone64
Bit
- 12 11 10 9 8 - 3 2 1 0
Set Output1,
Resettable Alarm
Set Output2,
Non-resettable Alarm
Set Output3
Clear Overtemp Occurred
Clear Output3
Clear2, Non-resettable Alarm
Clear1, Resettable Alarm
Set Output4 (Alarm Bar)
Clear Output4 (Alarm Bar)
Not used