11
●
：
℃ or ℉ temperature display selection
1. When the display changes to or , the station enters the mode for changing the
temperature display.
2. and will be switched alternately if you press the
(
) button.
3. The display will return to if you press the
button after selecting.
● ：
Auto sleep time setting
Set the time until the auto sleep function activates after the soldering iron is set on the iron holder.
Auto sleep examples:
Sleep (immediately after the iron is set on the iron holder)
Sleep (10 minutes after the iron is set on the iron holder)
NOTE:
The auto sleep time can be set in units of minutes (up to 29 minutes).
Select a parameter
number 02
Press the or botton
Press the button once
Press the button once
When the display is , press the
or
button, or remove the soldering iron from the
iron holder to resume power to the heater.
The display will return to if you press the
button after selecting.
CAUTION
• When the setting temperature is 300ºC (570ºF) or less, the sleep function cannot be set to
Sleep even if the sleep function is set to ON.
• The tip temperature rises to the setting temperature once at power on even if the sleep time is
set to “0” . The tip temperature will be reduced to the sleep temperature after the temperature
reaches the set temperature.
Press the or botton
