16
Read from the
center of the ball.
Turn clockwise to increase the airflow.
Turn counterclockwise to decrease the airflow.
9. File writing
Press the
button for 1 second or more to
shift into the file writing mode. Use the
or
buttons to display
and press the
button. The file writing will be completed.
NOTE:
If
is selected, the data will be returned
to the data before change and the mode will
be shifted to the file number selection mode.
*
In AUTO mode, files are not selected. Select
the file to be used and start it.
F. Airflow adjustment
Adjust the flow rate of the hot air while watching
the airflow meter. The adjustment range is 5
l
/min
to 20
l
/min.
CAUTION
Do not apply excessive force when turning the
airflow control knob.
G. Set data checking method
Setting in Auto mode
Select your desired file No. in advance.
Press the
button.
Press and hold the
button for more
than 1 second.
Mode display
Step 1: Temperature check
Step 1: Time check
Step 2: Temperature check
Step 2: Time check
Use the button to go next.
Use the button
to go next.
Use the button to return
to temperature display.
Use the button to return
to temperature display.
Use the button to return
to temperature display.
Use the button
to go next.
Use the button
to go next.
* If no button is input for 2 seconds or more in any condition, the unit will be returned to normal conditions.
Step 3: Temperature check
Step 3: Time check
Use the and buttons
to change the STEP.
Use the and buttons
to change the STEP.
Use the and
buttons to change
the STEP.
.(INSTALL and REMOVE checking)
Press the button.
Press the
or
button.
