Hakko Electronics FR-400, Инструкция по эксплуатации

Страница: 14 / 35

6. PARAMETER SETTING
13
Parameter name
Temp Mode
ShutOff Set
Timer**
Vaccum Mode
Vacuum Time***
AutoSleep
Sleep Temp
Low Temp
Error Alarm
Ready Alarm
Pass. Lock
Password****
Initial Reset
●
PARAMETER SETTINGS
Press and hold any one of
the three control buttons while
turning on the power switch.
①
②
Press and hold any one of the three control buttons, and turn on the power switch to
display the parameter setting screen. The following parameters can be set:
* For USA.
** Auto-shutOff Time can be set when Auto-ShutOff is set to ON.
*** Vacuum Time is displayed when Vacuum Mode is set to "Timer."
****Password is displayed when Password Lock is set to "ON" or "Partial."
* Operation procedure for parameter setting
Use <
↑
>, <
↓
>, and <OK> to set parameters as you do in the operation settings. When you are finished,
press the “OK” button in the parameter setting screen to return to the normal display.
Initial value
℃ (℉ *)
OFF
30 min
Normal
1sec
6 min
200 ℃ (390℉ )
150 ℃ (270℉ )
ON
ON
OFF
-
Value
℃ / ℉
OFF / ON
30 ~ 60 min
Normal / Timer
1
〜
5sec
OFF / 1 ~ 29min
200 ~ 300 ℃
(390 ~ 570 ℉ )
30 ~ 150 ℃ (54 ~ 270℉ )
ON / OFF
ON / OFF
ON (Lock/Partial) / OFF (unlock)
“ABCDEF” Select three letters
℃ / ℉ / Cancel