Hakko Electronics FR-400, Инструкция по эксплуатации

Страница: 7 / 35

6
●
Changing various settings
(other than preset selections)
1. Press and hold any one
of the three control buttons
for at least 2 seconds.
The following settings can be changed from this screen:
Set Temp
Offset Temp
Vacuum Check
Preset Temp
Preset ID
LCD Contrast
<Exit>
(Nozzle temperature setting)
(Nozzle temperature offset setting)
(Check of nozzle clogging and suction force)
(Setting of each preset temperature)
(Setting of each preset name)
(Contrast adjustment of display screen)
(Return to the setting screen)
* Change of selected setting
Depending on selected setting, the display on the screen differs. However, you
can make changes to the settings by following the above operation procedure.
After completing the changes to the setting, if you press the “OK” button again in
the selection screen, you will return to the normal display.
Set Temp
Offset
Temp
Vacuum Check
<↓> <OK> <↑>
4. Press the “OK” button to
finalize your selection.
2. The setting selection screen
appears.
Set Temp
Offset
Temp
Vacuum Check
<↓> <OK> <↑>
3. Make your PRESENT SELECTION
by moving the cursor UP or DOWN
by pressing the corresponding
buttons.
Set Temp
Offset
Temp
Vacuum Check
<↓> <OK> <↑>