Hakko Electronics FP-948 Скачать руководство пользователя страница 56

Страница: 56 / 68

日

本語

中文

English

7. PARAMETER SETTINGS

4 Resetting the supervisor/operator

control setting

8. MAINTENACE/CHECKING PROCEDURE

Performing proper and periodical maintenance extends the products life and contrib-

utes to use it always in a good condition.

Efficient soldering depends upon the temperature, the quality and quantity of the solder

and flux. Apply the following service procedure as dictated by the conditions of the

usage.

WARNING:

Since the soldering iron can reach a very high temperature, please work

carefully. Except the case especially indicated, always turn the power switch

OFF and disconnect the power plug before performing any maintenance

procedure.

●

Tip maintenance

1. Tip temperature

High temperatures shorten tip life and may

cause thermal shock to components. Always

use the lowest possible temperature when

soldering. The excellent thermal recovery

characteristics of the MODEL FP-948 ensure

effective soldering at low temperatures.

To change the supervisor/operator control set-

tings, the procedure is as follows.

●

The display will show

when

this mode is entered.

: No offset value can be entered

without inserting the card.

: An offset value can be entered

without inserting the card.

Pressing the

button will change

and

When  the  desired  setting  is  displayed,
select by pressing   button.
The  system  will  exit  the  parameter  setting

mode and begin heater control.

It is now ready for normal operation.

Содержание FP-948





































































Результаты поиска

Содержание FP-948

Отзывы:

Похожие инструкции для FP-948

Бренды по названию

Популярные бренды

Hakko Electronics FP-948, Инструкция по эксплуатации

Результаты поиска

Содержание FP-948

Отзывы:

Похожие инструкции для FP-948

Бренды по названию

Популярные бренды