Hakko Electronics FP-948 Скачать руководство пользователя страница 51

Страница: 51 / 68

日

本語

中文

English

When you need one soldering iron only, refer to

the following example.

(Ex.) IRON 2 is not required

1. Change the display of IRON to
2. Press

button until the displayed figure

disappears.

NOTE:

The heat to the IRON 2 will not function.

3. Press button to display IRON 1.

The change is stored in the system memory

and does not disappear even after power off.

●

Changing the temperature setting

The allowable changes for temperature setting are:

°C..........200~450°C

°F...........400~840°F

Example: 350°C to 400°C for IRON 1

1. Confirm that the display of IRON is .

If it shows , press button to show .

2. Insert the control card into the slot in the

front of the unit.

• The

hundreds digit will begin to flash,

indicating that the unit is in the TEMPERA-

TURE SET mode and data may be entered.

3. Entering the

hundreds digit

• Press the

button to set the

desired figure. When the desired figure is
displayed, press the

button to enter.

The

tens digit will begin to flash.

4. Entering the

tens digit

• Press the

button to set the

desired figure. When the desired figure is
displayed, press the

button to enter.

The units digit will begin to flash.

5. Entering the

units digit

• Press the

button to set the

desired figure. When the desired figure is
displayed, press the

button to enter.

The desired temperature is now entered

into the system memory and heater

control will begin.

Insert the card.

Press the

button.

Press the

button.

Press the

button once.

Press the

button once.

Press the

button once.

NOTE:

If power is switched off or lost during the execution

of this procedure, no data will be entered. The entire

procedure must be repeated from step 1.

NOTE:

Temperature setting can be changed even during the

display for the temperature and the heat to the iron

is OFF, If MODEL FM-2025 soldering iron and tip are

connected properly.

Содержание FP-948





































































Результаты поиска

Содержание FP-948

Отзывы:

Похожие инструкции для FP-948

Бренды по названию

Популярные бренды

Hakko Electronics FP-948, Инструкция по эксплуатации

Результаты поиска

Содержание FP-948

Отзывы:

Похожие инструкции для FP-948

Бренды по названию

Популярные бренды