![background image](http://html1.mh-extra.com/html/hakko-electronics/470b/470b_instruction-manual_3301766012.webp)
WARNING : If the power cord is damaged, it must be replaced by
the manufacturer, its service agent or similarity
qualified person in order to avoid personal injury or
damage to the unit.
Troubleshooting Guide
11
Power lamp does not light up.
· Is the power cord plugged in correctly?
Securely insert the power cord into the power supply.
· Is the fuse blown?
Investigate why the fuse blew and then replace the fuse.
If the cause can not be determined, replace the fuse.
If the fuse blows again, send the unit in for repair.
Example Is the inside of the gun short-circuited?
Pump does not operate.
· Is the cord assembly properly connected?
Reconnect the cord assembly. (refer to p.6)
· Is the nozzle or hole in the heating element clogged?
Clean it. (refer to p.12)
Solder is not being absorbed.
· Is the spring filter full of solder?
Replace it with a new one. (refer to p.13)
· Is the ceramic filter hardened?
Replace it with a new one.
· Is there a vacuum leak?
Check the connections and replace any worn parts.
(refer to p.10)
The nozzle does not heat up.
· Is the desoldering gun cord assembly properly
connected?
Reconnect it. (refer to p.6)
· Is the heating element damaged?
Replace it. (refer to p.17)
Note : When repairs are needed please send both the desoldering gun
and the station to your sales agent.