28
・Push "mode change key" for 1 second long time in opera-
tion mode.
蛯
It changes for present value display to "
"
mode.
・Push "
key" four times in "
" mode.
蛯
It changes for present value display to "
"
and for set value display to "
". It goes to set
mode of working temperature of temperature
control irregularity 1.
・Set value to "
" with pushing "mode change key" and
after having "
" go on and off and pushing "
key".
Then fix with pushing "mode change key".
蛯
It has been set at 280 ℃ of working tempera-
ture of temperature control irregularity 1.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
alter setting value
starting work at 280 ℃
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
heading mode of
parameter block 1
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
action of temperature
control irregularity 1
code of temperature
setting mode
initial setting value of
temperature control
irregularity 1
USAGE EXAMPLE AND HOW TO SET PARAMETER
6. Alter temperature of working of temperature control irregularity 1, so as to put
off heater in 280 ℃ with thermocouples equipped at outlet of device.
・Push "
key" one time in "
" mode.
蛯
It changes for present value display to "
"
and for set value display to "
". It goes to set
mode of working temperature of temperature
control irregularity 2.
・Set value to "
" with pushing "mode change key" and
after having "
" go on and off and pushing "
key".
Then fix with pushing "mode change key".
蛯
It has been set at 30 ℃ of working temperature
of temperature control irregularity 2.
・ Push "mode change key" for 2 seconds long time.
蛯
It changes to operation mode.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
alter setting value
starting work at 30 ℃
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
action of temperature
control irregularity 2
code of temperature
setting mode.
initial setting value of
temperature control
irregularity 2
7. It is set for working temperature of temperature control irregularity 2 at 30 ℃,
so as to put off heater in +30 ℃ compared with setting value at thermocou-
ples wired with thermocouples-2 in put.
By completion of the above setting, it shows
temperature of thermocouples wired with ther-
mocouples-2 in put in present value display of operation mode.
It shows temperature of thermocouples assembled with outlet in
monitor "
" of thermocouples for warning. (refer to page 17)
CAUTION
