26
USAGE EXAMPLE AND HOW TO SET PARAMETER
Ex.4) Control temperature outside with thermocouples-2 in put of outer con-
trol terminal wired with thermocouples to be located outside Hot Air
Generator.
Alarm of thermocouples-2 limits at variation upper +30 ℃ (heater
is put off when it b30 ℃ against setting value, it puts
on out put 2 of temperature control irregularity of outer terminal)
when it becomes 280 ℃ at thermocouples combined with outlet
of device, it puts off heater and operates wind fan, then it puts
on heater again at 277 ℃(two points temperature control by
outer thermocouples and thermocouples located at outlet)
＊ Before setting parameter, in condi-
tion of power off, wire k type ther-
mocouples with in put terminal of
thermocouples-2 of outer control
terminal, Use non earth contact
type of thermocouples.
・Push "mode change key" for 3 seconds long time in oper-
ation mode.
蛯
present value display changes to "
", "
" and
"
".
・Push "
key" eight times at "
" indication mode.
蛯
Present value display changes to "
", set
value display changes to "
" and it goes into in
put indication mode of thermocouples for con-
trol.
・Push "mode change key", "
key" and "mode change key"
each one time in order.
蛯
set value display is changed in "
" and is fixed.
Control is set with thermocouples wired with in
put of thermocouples-2 of outer control termi-
nal.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
alter setting value
"1": absolute value
upper limit warning.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
ahead view of parame-
ter block 2.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
in put of thermocou-
ples for control a code
indicated.
"1": to control with
thermocouples
assembled in device.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
warning of temperature
control irregularity 1
type: correspond to
thermocouples of outlet
of device.
"5": variation upper
limit warning.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
" 2 ": to control with ther-
mocouples of in put of
thermocouples-2 of
outer control terminal.
1. Sensor controlling temperature of Hot Air Generator is as thermocouples wired
with in put of thermocouples-2 of outer control terminal
2. Absolute value upper limit warning is as warning set of thermocouples assem-
bled in outlet of main body.
・Push "
key" four times at "
" indication mode.
蛯
Present value display changes to "
", set
value display changes to "
" and it goes into
indication mode of warning kinds of temperature
control irregularity 1.
・Set value to "
" with pushing "mode change key" and
after having "
" go on and off and pushing "
key" then
fix with pushing "mode change key".
蛯
It is set that absolute value upper limit warning
is as type of warning of temperature control
irregularity 1.
