HAKKI PILKE RAVEN
TRANSLATION
VERSION 1-2015
3.5 AFTER USE
1.
After you have finished making firewood, stop the output conveyor, shut down the machine and
remove the firewood from the splitting groove and conveyor.
2.
Ensure that the machine has not been damaged.
3.
Place the output conveyor into a position that allows the conveyor and firewood processor to be
moved safely off the processed firewood.
4.
Clean the machine.
If you will not be using the firewood processor for a while, do the following:
5.
As necessary, use your tractor's hydraulics or a forklift to hoist the firewood processor and carefully
move it to a location where you can place the input and output conveyors as well as the working
platform into their transport and storage positions.
6.
Place the conveyors into the transport and storage position.
7.
Clean the machine and carry out any maintenance.
8.
Store the machine according to the instructions in Section 4.13.
4 Maintenance and adjustment of the machine
The machine must be disconnected from its power source before maintenance, adjustment, replacement
or cleaning procedures. Only use spare parts that are supplied by the manufacturer or your retailer. If the
guards of the machine have to be removed for maintenance, they must always be reattached before acti-
vating the machine. After maintenance and adjustment measures, a test run must be carried out on the
machine, according to the instructions in Section 3.3.
4.1 DISCONNECTING THE MACHINE FROM ITS POWER SOURCE
Tractor-powered model
Turn off the tractor and disconnect the machine’s cardan shaft from the tractor.
Electrically powered model
Turn off the machine and disconnect the power cable from the socket.
Ensuring that the machine is inactive
Once you have disconnected the machine from its power source, always ensure that the machine is com-
pletely inactive before performing any other measures!
