-12-
2
.
Inspection
・
Adjustment for drill carriage adjustment part.
◎
Adjust the clearance between the pole and drill
carriage by moving the Feeding Handle, and
screw 6 places of drill carriage adjustment screw
on the part of drill carriage by screwdriver in a
balanced.
POINT
1. If you screw the drill carriage adjustment
screw tighten, it will be hard to rotate the
Feeding Handle.
2. If the slide face is worn away, adjustment
will be needed.
3
.
Checking of attaching screws
◎
Check every attaching screws for loosening periodically. If found loose, tighten it.
Drill Carriage
Adjust Bolt
(4 places)
Drill Carriage
Adjust Bolt
(2 places)