- 78 -
8.4. TCPA Limit
The values allowed are from 1 to 50 min.
(
☞
The default setting
is 1 min.)
8.5. Radius Alarm
When any AIS target breaks into the radius, alarming.
8.6. Radius
The values allowed are from 0.1nm to 10nm.
(
☞
The default setting is OFF.)
8.7. Ignore Vessels if Speed Less
If you want the alarms to ignore vessels that are travelling at less than a particular speed then switch
ON.
8.8. Speed less than
The values allowed are from 0.1kt to 9.9kt.
9. Set up AIS outs etc
9.1. Mark vessels as lost after
Setting the time of “Lost target”.
(
☞
The default setting is
7min.)
9.2. Remove lost vessels after
If the updating AIS target is unavailable in the set time, erasing the AIS target on the screen..
(
☞
The default setting is
10min.)
9.3. Vessel target
It is available to setup the own vessel’s AIS target display on the screen.
(
☞
The default setting is
On.)
10. Others
10.1. Labels on vessels
This menu controls what details are displayed alongside the vessels icons on the chart display.
Содержание Stella Series
