HairMax PowerFlex Laser202, Руководство пользователя

Страница: 15 / 28

13
Treatment Instructions
Place the device on your head in a comfortable
relaxed position (Figure F).
Press the Bottom Button (Figure G). You will hear a
beep and the display will illuminate (Figure H).
By pressing the Top Button while the display is still
flashing (within the first four seconds), the device
will toggle between the default 15-minute
Continuous-On Mode and the 30-minute
Pulse Mode.
We recommend using the default
15-minute Continuous-On Mode.
The display will flash for 4 seconds
and the Laser Indicator Light on the
Controller/Battery Pack will illuminate
(Figure H).
The Laser Indicator Light on the
Controller/Battery Pack (Figure H) will
indicate your lasers are on and functioning
properly.
Once your treatment is completed (either 15 minutes
or 30 minutes), the Controller/Battery Pack will beep twice
and turn off.
If you choose to power off your device before the
treatment is complete, press and hold the Bottom Button
for 2-3 seconds (Figure G) and the device will turn off.
Once your treatment is completed, disconnect
the Controller Cable from the Controller/Battery Pack.
Then charge the Controller/Battery Pack as indicated on
page 11 so it will be ready for your next treatment.
NOTE – your HairMax Laser Device cannot
be used while being charged.
08
F
G
H
TREA
TMENT
INSTRUCTIONS
TREATMENT INSTRUCTIONS
Top Button
Bottom Button
ATTENTION
The HairMax Laser Device must be plugged into the
Controller/Battery Pack in order to operate.
ONLY UTILIZE THE PROVIDED CONTROLLER/BATTERY PACK
WITH YOUR HAIRMAX LASER DEVICE. PLUGGING INTO
ANY OTHER POWER SOURCE MAY DAMAGE THE DEVICE
AND VOID YOUR WARRANTY.