EN
18
Make sure that the power supply voltage
shown on the rating label corresponds to
that of your electrical installation.
Regularly check the condition of the
electrical lead.
If the lead shows any signs of damage it
must be replaced by the manufacturer or
their after-sales service or persons with
similar qualifications to avoid any hazard.
In the event of failure of the power pack, it
must be replaced by a model that is
identical in all points.
The electrical lead must always be fully
unrolled before it is connected to a power
socket.
At the end of each day, the equipment and
its accessories must be unplugged from the
power supply.
Never pull on the lead to unplug it.
Содержание TH35
Страница 2: ...2 Fig 1 Fig 2a Fig 2b Fig 3 Fig 4...
