Hainbuch T213 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 76

background image

Segmented mandrel T213 – Safety

2.2 Personnel requirements

WARNING!
Danger of injury due to insufficient qualifi-
cation!

Improper handling of the clamping device can
cause serious injury or material damage.



Only have activities performed by personnel
who are qualified to perform these activities.

The following qualifications are cited in the operating
manual for the various activity areas.



Specialized personnel

are personnel who due to their specialized training,
skills, and experience, as well as knowledge of the
applicable regulations, are capable of executing the
tasks assigned to them and of recognizing and
avoiding possible hazards on their own.



Hydraulic specialist

The hydraulic specialist has been trained for the
particular task area in which he is active and is fa-
miliar with the relevant standards and regulations.
Due to his specialized training and experience the
hydraulic specialist can perform tasks on hydraulic
equipment and recognize and avoid possible dan-
gers on his own.



Electric specialist

The electric specialist has been trained for the par-
ticular task area in which he is active and is familiar
with the relevant standards and regulations.
Due to his specialized training and experience the
electric specialist can perform tasks on electric
equipment and recognize and avoid possible dan-
gers on his own.

Only persons from whom it can be expected that they
reliably execute their work are considered as person-
nel. Persons whose capability to react is impaired, for
instance through drugs, alcohol, or medication, are
not approved.



Comply with age-specific and job-specific regula-
tions that are applicable at the installation site when
selecting personnel.

10

Order h49 7144.907-333

«
...
8
9
10
11
12
...
»

Содержание T213













































































Отзывы:

Нет отзывов

Похожие инструкции для T213

Бренд: Jefferson Страницы: 4

Бренд: BorMann Страницы: 12

Бренд: Moog Videolarm Страницы: 6

Бренд: Neilsen Страницы: 2

Бренд: TE Connectivity Страницы: 8

Бренд: Samoa Страницы: 16

172 Series 1996

Бренд: Cessna Страницы: 798

Бренд: Milwaukee Страницы: 4

Бренд: Westward Страницы: 27

Бренд: Textron Страницы: 2

Klauke EK 425CL

Бренд: Textron Страницы: 15

Бренд: MSW Страницы: 7

Huck HK150-S456

Бренд: Alcoa Страницы: 12

Бренд: Nederman Страницы: 86

Бренд: Hardinge Страницы: 2

Бренд: Costway Страницы: 7

Бренд: NACD Страницы: 32

Бренд: Forward Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды