Quick change-over system centroteX M
Use
50
Order h49 7144.907-333
WARNING
Serious injuries caused by failure to follow the
commissioning procedure for the clamping de-
vice!
In addition to these operating instructions, you
should also read and follow the operating instruc-
tions for the associated clamping device / quick
change-over adapter.
12. Set the operating pressure to the permitted machining
value. The machine tool must not start up until full oper-
ating pressure has built up.
8.3 Removal of the quick change-over unit
A
Quick change-over unit
A1 Quick-release screws, quick change-over unit
If a break in production occurs that lasts for more than three
days, the quick change-over unit / the quick change-over
adapter must be removed and stored safely in accordance
with the manufacturer's stipulations [see operating instruc-
tions for the quick change-over unit / the quick change-over
adapter].
INFORMATION
To simplify installation / removal of the quick change-
over unit on a horizontal spindle of the machine, Mon-
teq lifting tackle can be used [see operating instruc-
tions for the lifting tackle].
