Quick change-over system centroteX M
Use
Order h49 7144.907-333
45
WARNING
Serious crushing injuries caused by incorrect ma-
chine movement during installation / removal of
the quick change-over unit!
Machine movements are only permitted in set-up
mode during installation / removal of the quick
change-over unit.
Never reach into a gap.
Pay attention to the gap dimensions of moving
parts.
WARNING
Serious head injuries caused by bending into the
working area of the machine!
Only bend down into the working area of the ma-
chine if it contains no cutting tools or sharp ob-
jects, or if these are covered.
Never move body parts under parts in the working
area of the machine with the potential to drop
down.
Depending on weight, use an appropriate mount-
ing aid for installation / removal of the quick
change-over unit on a vertically suspended ma-
chine spindle.
WARNING
High level of physical strain due to the weight of
the product or of its components if not trans-
ported properly!
From a weight of 10 kg, use appropriate transport
equipment, lifting gear and lifting tackle.
NOTE
Damage to materials caused by lifting gear left in
the product!
Always remove lifting gear immediately after in-
stallation / removal of the quick change-over unit.
NOTE
Damage to components caused by cooling lubri-
cants with sufficient levels of corrosion inhibitor!
The components made of steel materials must be
protected before the usual oxidation process.
Only ever use cooling lubricants with sufficient
levels of corrosion inhibitor.
