8
Maintenance
Any Shock Absorbing Lanyards
requiring maintenance must be tagged “unusable” and removed from service.
Storage
■
When not in use, Shock Absorbing Lanyards should be stored in a cool, dry place out of direct sunlight.
■
Do not store in areas where damage from environmental factors such as heat, light, excessive moisture, oil, chemicals and their
vapors, or other degrading elements may be present.
■
Do not store damaged equipment or equipment in need of maintenance in the same area as product approved for use. Equipment
must be cleaned and dried prior to storage.
■
Equipment that has been stored for an extended period must be inspected as described in these
User Instructions
prior to use.
Labeling
All labeling must be legible and attached to the energy absorber lanyard.
Notes
If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE.
User must inspect prior to EACH use.
Competent Person other than user must complete formal inspection at least every 6 months.
Competent Person to inspect and initial. Date of first use: ________________.
Product lifetime is 3 years as long as it passes pre-use and Competent Person inspections. REMOVE FROM SERVICE 5 years after date
of first use, or, if not recorded, from date of manufacture. This inspection log must be specific to one Internal Shock Lanyard.
Separate inspection logs must be used for each Internal Shock Lanyard. All inspection records must be made visible and available to
all users at all times.
Warning:
It is essential for safety that equipment is withdrawn from use immediately should
a)
Any doubt arise about its condition for safe use or:
b)
It has been used to arrest a fall
LOGO
Type of device
European Standard
CE designation
Manufacturer Date
