6
Connecting Shock Absorbing Lanyards That Have a Shock-Pack
Absorbing Lanyards with a shock-pack must be connected in a specific location. The shock absorbing end of the lanyard must connect to
the dorsal D-ring of the full body harness. The opposite end of the lanyard is to be connected to the anchorage connector.
Connecting Y-Lanyards
Y-Lanyards are designed for single person use only. The shock absorbing end of the lanyard must be connected to the dorsal D-ring of
the full body harness. Attach one leg of the Y-Lanyard to the anchorage connector and the unused lanyard leg to an approved lanyard
storage keeper on the harness.
Compatibility of components and subsystems
This equipment is designed for use with EN approved components and subsystems. Substitutions or replacements made with
non-approved components or subsystems may be incompatible, and may jeopardize the safety and reliability of the complete system.
Compatibility of connectors
Connectors are considered to be compatible with connecting elements when they have been designed to work together in such a way
that their sizes and shapes do not cause their gate mechanisms to inadvertently open regardless of how they become oriented. Contact
The manufacturer if you have any questions about compatibility.
Connectors (hooks, karabiners, and D-rings) must be capable of supporting at least 22 KN.
Connectors must be compatible with the anchorage or other system components. Do not use equipment
that is not compatible. Non-compatible connectors may unintentionally disengage.
During the use of Y-Lanyards to move between fall protections systems, attach the unused leg of the lanyard to the new location before
disconnecting the first lanyard leg. Connection of both lanyard legs to separate anchorage connectors while transitioning between
systems is acceptable.
Connecting Personal Shock Absorbers
Personal shock absorbers should be connected to the dorsal D-ring of the full body harness first and then connected to the rest of the
fall arrest system.
