7
en
Use non-conductive ladders for unavoidable live
electrical work.
Do not use the ladder as a bridge.
Do not modify the ladder design.
Do not move a ladder while standing on it.
For outdoor use caution to the wind.
Ladder for
“professional” and
“non professional”
use.
Do not step off the side of standing
ladder onto another surface.
Open the ladder fully before use.
Standing ladders shall not be used
as a leaning ladder unless it is
designed to do so.
Do not stand on the top two steps/
rungs of a standing ladder without a
platform and a hand/knee rail.
Check ladder feet and supporting
surface area.
The steps must be aligned
horizontally to the surface on which
the ladder is being set up.
Locking mechanisms for all extend-
ed rungs/steps must be inspected
and locked before use.
Only climb the ladder when the steps
are securely locked. The locking
guide „GREEN“ must be fully visible,
all relevant locking pins must be
correctly engaged.
When using the ladder, do not touch
or manipulate the locking mecha-
nism UNDER ANY CIRCUMSTANCES.
Do not put hands/fingers in the
rung area (shearing area) when the
ladder is brought to its intended
position of use.
Do not use the ladder UNDER ANY CIRCUMSTANCES
in dirty or dusty environments. The penetration of
‘foreign matter’ can make extending and collaps-
ing the ladder difficult.
Do not immerse the ladder under water UNDER ANY
CIRCUMSTANCES since it will thereby be dam-
aged and extending and collapsing it will be made
difficult.