3
Warning
■
This User Instruction Manual is not to be removed except by the user of this equipment.
■
Current User Instruction Manuals must always be available to the user.
■
Read and understand these instructions before using equipment.
■
Do not throw away these instructions.
■
Do not alter the equipment.
■
Do not misuse the equipment
■
Do not exposure to light (UV degradation).
■
Failure to follow all instructions and limitations on the use of this equipment may result in serious personal injury or
death.
■
Prior to each use, inspect all personal fall arrest system equipment for wear, damage, and other deterioration.
Defective components must be removed from service immediately.
■
After a fall, the Hailo Wind Systems Full Body Harness must be removed from service and destroyed immediately.
■
Thoroughly evaluate and plan all elements of your fall protection system(s) before using your equipment. Make sure
that your system is appropriate for your needs and facility. Also be sure to calculate fall clearance and swing fall
clearance.
■
Users must have a rescue plan and the means to implement it. This plan must provide prompt employee rescue or
assure that employees have the ability to rescue themselves in the event of a fall.
■
Store this equipment in a cool, dry, and clean environment that is out of direct sunlight when not in use.
■
After a fall occurs, this equipment must be removed from service and destroyed immediately.
■
Failure to follow all instructions and limitations on the use of Personal Energy Absorbers and Energy Absorbing
Lanyards may result in serious personal injury or death.
■
Failure to have the leg straps of the Full Body Harness properly adjusted in the event of a fall arrest may result in
serious personal injury or death.
■
Never attach the unused leg of the lanyard back to the Hailo Wind Systems Full Body Harness anywhere other than an
approved lanyard storage keeper.
■
To minimize the potential for accidental disengagement, a Competent Person must ensure system compatibility.
■
All equipment must be inspected before each use according to the instructions found in this User Instruction Manual.
All equipment should be inspected by a qualified person on a regular basis.
■
Never use fall protection equipment for purposes other than those for which it was designed.
■
Environmental hazards should be considered when selecting fall protection equipment.
■
Do not expose the equipment to any hazard which it is not designed to withstand. Consult Hailo Wind Systems
Industrial in cases of doubt.
■
Never remove product labels because they include important information for the Authorized Person/User.
■
Only the equipment manufacturer, or persons or entities authorized in writing by the manufacturer, make repairs to
the equipment.