15.SET Button
Used to confirm TIMER and CLOCK settings when
heating or cooling.
3
Parts and Functions
Remote controller
1.TEMP Setting Button
(Used to set temperature. Setting ranges:
16 C to 30 C)
2.SWING Button
If you press this button once, auto swing will be
activated.
If you press this button again, the louver will fix
in the present position.
3.Power ON/OFF Button
Used for unit start and stop
After power on, the LCD of remote controller will
display the previous operation state (except for
TIMER,SLEEP and SWING state).
4.Operation MODE
Used to select operation mode.
Every time you press MODE button, operation mode
changes according to following sequence:
The function of code A
6.CLOCK Button
Used to set correct time.
7.TIMER Button
Used to select TIMER mode:TIMER
ON,TIMER OFF, TIMER ON/OFF.
(Note: if time of TIMER ON is the same as TIMER OFF,TIMER
ON/OFF cannot be set)
10.RESET Button
Press this button by using a sharp article to resume the
correct operation of the remote controller in case of need,
i.e. for example in case of malfunctions due to
electromagnetic disturbance.
5.HEALTH Button
13.HOUR Adjustment
Used to set clock and timer setting
8. FILTER Button
Used to set up/down function of filter.
NOTE:
1.Single cooling air conditioner does not have the displays and functions related to heating.
2.Some functions of this controller maybe not available according to the corresponding PCB's functions,such
as: In function of code A which are optional for different unit.
3.HIGH/SO button:This button is active in Cooling/Heating mode, the fan speed is in AUTO mode after pressing
it and " high functon/soft function " will be automatically cancelled after 15 minutes running.
4.
HEAT button:
This button can only be used for units with electric heater function.
9.CODE Button
Used to select Code A or B,
Series
wired remote controller
units use Code A,
Series
remote controller units use code B.
14.HIGH/SO Button
Used to select HIGH or SOFT operation.
11.LIGHT Button
Used to light the control panel (only for cabinet unit)
12.LOCK Button
Used to lock operation button and LCD display contents: by
pressing this button, other buttons comes out of function and
lock state display appears; if you press it again, lock state
will be no more active and lock state display will disappear.
The function of code B
AUTO
FAN
HEAT
COOL
DRY
FRESH
HIGH/SO
TIMER
SET
FILTER
B
A
M
D
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
SWING
MODE
CLOCK
CODE
LIGHT
OFF
A
U
T
O
25
26
21
23
17
15
18
19
22
24
27
20
14
16
36
1
2
3
4
6
7
9
10
5
8
34
33
28
32
31
30
35
29
The function of code A
Used to select TIMER mode:TIMER
ON,TIMER OFF.
The function of code B
8
5
2
16
28
30 33
29
14
11
17 21 24
HEAT
13
37
12
11
HEAT
COOL
DRY
8
At night, before going to bed you can press
down the SLEEP button on the controller
and the air-conditioner will run by the
comfortable sleeping mode to make you sleep
more comfortable.
In cooling, dehumidifying mode
In heating mode
Comfortable Sleep
Note:
In AUTO mode, unit will run in SLEEP function according to the operation mode.
After setting SLEEP function, it is forbidden to calibrate clock.
If the set sleep-time does not reach 8 hours, the unit will stop operation automatically after set time
is complete.
Set "TIMER-OFF" function first, then set SLEEP, and the sleep-set is performance; set TIMER-ON
function first, the sleep function can only be set before TIMER-ON; if set theSLEEP function first,
the TIMER function can not be set.
Note: Before using this function of code A, must
adjust the clock, or the sleep function will be disordered.
After setting sleep function, not allowed to adjust the clock. Can't use the remote controller operate the
AC. If so, please cancel the sleep function first.
After setting sleep function, can't set the timing function.
One hour after start up, the temp. decrease 2 lower than the setting one. After another hour decrease by
more 2 .
The temperature will automatically rise by 1 after another 3hrs' operation, and then automatically close
after 3hrs' continuous operation. The actral temperature is lower than the setting one which is to prevent
from being too hot to your sleep.
One hour after sleeping operation start, the temp. is 1 higher than the setting one. After another hour the
temp. rises 1 and then run continuously for another 6hrs' and then close. The actual temp. is higher than
the setting one which is to prevent from being too cool to your sleep.
FRESH
HIGH/SO
TIMER
SET
FILTER
A
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
SWING
MODE
CLOCK
CODE
LIGHT
OFF
A
U
T
O
Operation
SETTING T
SLEEP RUN BEGINS
SLEEP RUN STOPS
1 hr
1 hr
3 hrs
about 3 hrs
decrease 2
decreases 2
increase1
SHUT DOWN
Heat mode
about 6 hrs
1 hr
1 hr
increase 1
increase 1
SLEEP RUN STOPS
SLEEP RUN BEGINS
SETTING T
SHUT DOWN
Cooling mode
The function of code A:Sleep function
*
MODE
FAN
HEALTH
TEMP
CLOCK
SET
TIMER
SLEEP
RESET
ON/OFF
AM
SET
OFF
AM
SWING
FILTER RESET
HEAT
HEAT
