Haier PGT2.0-2, Руководство по установке

Страница: 29 / 35

29
Step 1: Make support 1, 2 and 3 of the collector with angle steel as per the drawing above and assemble support 1,
2 and 3 with bolt 5; tighten and fix them;
Step 2: Drill holes on the external wall and insert expansion bolt 4 into the holes;
Step 3: Fix the support which has been assembled in step 1 onto the external wall;
Step 4: Put the plate collector 6 onto the support and connect the plate collector 6 with the fixed support with bolt
7 through the outer frame of the plate collector.
平板集热器
M8
螺栓
M8
膨胀螺栓
角钢支架
I
I
Angle iron support
M8 bolt
plate heat collector
M8 expansion bolt