Haier PGT2.0-2, Руководство по установке

Страница: 18 / 35

18
1:Channel steel connector 2:Nut 3
：
Gasket 4:Rubber gasket 5:Collector fixing Bolt
6:Spring shim 7:Nut 8:Color steel plate 9:C steel
Step 1:Drill holes on the color steel and C steel;
Step 2:Insert the collector fixing bolt into the holes drilled; assemble nut 7 and spring shim 6 in order and tighten
them; assemble nut2, gasket 3 and rubber gasket 4 in sequence with the collector fixing bolt 5; as it is just for
sealing, don’t make them too tight;
Step 3:Fix the channel steel connector to the collector fixing bolt 5.
1:Channel steel 2:Collector fastener 3:Bolt 4:Nut
Step 4: Prepare the hole-drilled channel steel, fix the collector fastener 2 with channel steel 1 with bolt 3 and nut 4;
screw them up.
Step 5: Fix the plate collector with the fixed channel steel with bolt through the fixing hole on the outer frame of
the plate collector.