>:
Ffter passing the connection cord and power cable through the insulation tube3 fasten it with the cord clamp3
as shown in Kig597
MT\ YT KN]JI HTSSJHYNTS HTWI FSI UT\JW HFGQJ FY YMJ HTWI HQFRU
4Khf8 <:5
Nnsulation tube
Hord clamp
Yse Z[483 75< to 857 mm thick3 TZH tube as the insulation tube5
JQJHYWNHFQ \NWNSL
HFZYNTS
/80 Qatch the terminal block numbers and connection cord colors with those of the
outdoor unit5
Jrroneous wiring may cause burning of the electric parts5
/90 Honnect the connection cords firmly to the terminal block5 Nmperfect installation
may cause a fire5
/:0 Flways fasten the outside covering of the connection cord with the cord clamp5
/Nf the insulator is chafed3 electric leakage may occur50
/;0 Flways connect the ground wire5
85 NRISSV YRNX WNIJ
BEC FIMOSI RJI ILIHRQKH HOMPONINR GOTD
4Khf8 <;5
Jlectric component box
4Khf8 <<5
Jlectric component box
Vemove the four tapping screws5
HFZYNTS
Io not remove the screws5 Nf the
screws are removed3 the electric
component box will fall5
Содержание MRV II AV48NMVERA
Страница 112: ...112 5 Wiring connection among units ...